Airbot OmniNXT F7 Flight Controller – Omnibus – MyFPV

Description

Airbot OmniNXT F7 Flight Controller – Omnibus

Check out all of our Airbot Products!

Experience the next level of flight control with the Airbot OmniNXT F7, a top-of-the-line flight controller for pilots who demand options and performance. The standout feature of the OmniNXT is its dual-gyro system, featuring both the classic MPU6000 and the high-speed ICM20608. Housed in an onboard damping box, this innovative design allows you to choose the perfect gyro in Betaflight for a flawlessly smooth and locked-in flight experience.

Choose Your Gyro

This board is like having two flight controllers in one. In your flight software, you can select which IMU to use:

• MPU6000: The legendary, battle-tested gyro known for its incredible noise resistance and smooth performance at 8k loop times.
• ICM20608: A more sensitive, high-speed gyro capable of running at up to 32k loop times, perfect for top-tier racing performance.

Feature-Packed for Any Build

The OmniNXT is built around a powerful STM32F722 MCU and is packed with connectivity. It features 6 hardware UARTs for all your peripherals and dual BECs, including a dedicated 8V filtered output for a crystal-clear analog FPV video feed. The board has a convenient 8-pin port for a plug-and-play connection to Airbot 4-in-1 ESCs, but also includes traditional solder pads for individual ESCs or custom builds.

Key Features:

• Dual Onboard Gyros: Choose between the ultra-reliable MPU6000 or the high-speed ICM20608 for the perfect flight feel.
• Powerful F722 Processor: Provides the processing power needed for all modern flight firmware features, including high-speed loop times.
• 6 Hardware UARTs: Ample connectivity for your receiver, VTX control, GPS, and other peripherals without compromise.
• Filtered 8V VTX Power: A dedicated BEC with an LC filter provides clean, noise-free power to your analog VTX and camera.
• Onboard Barometer: A built-in barometer provides altitude data for more stable flight or use with GPS.
• Plug-and-Play Ready: An 8-pin harness port makes connecting to a compatible 4-in-1 ESC clean and simple.

Important Note: This flight controller does not have an onboard current sensor. It is designed to read the current sensor data from a connected 4-in-1 ESC via the 8-pin harness.

Specifications:

• MCU: STM32F722
• Gyros: MPU6000 & ICM20608 (Selectable)
• Barometer: Yes
• Mounting Holes: 30.5x30.5mm
• Input Voltage: 3-6S LiPo
• BEC 1: 5V@1A (Buck)
• BEC 2: 8V@1A with LC filter (Buck)
• OSD: Betaflight OSD

Package includes:

• 1x Airbot OmniNXT F7 Flight Controller
• 1x Set of Mounting Grommets