BetaFPV SuperX RX ELRS 2.4G/915M (Choose Your Reciver) – MyFPV

Description

SuperX RX ELRS 2.4G/915M

Check out all of our BetaFPV Products!

Conquer the airwaves with the BetaFPV SuperX ELRS Receiver, the first-ever receiver to master Gemini Xrossband (GemX) technology. Powered by the cutting-edge Semtech LR1121 RF chips and an ESP32-C3 MCU, the SuperX series breaks the barrier between frequency bands. Whether you need the penetration of 900MHz or the speed of 2.4GHz, the SuperX delivers unshakeable signal reliability where lesser links fail.

What is Gemini Xrossband?

Standard receivers listen on one frequency. Gemini utilizes true diversity to transmit and receive simultaneously. The SuperX takes this further with Xrossband:

• GemX Mode: Combines the deep penetration of 900MHz (868/915M) with the ultra-low latency of 2.4GHz in a single, seamless link. You no longer have to choose between range and speed—you get both.

• Blistering Speed: Supports up to 1000Hz packet rates in FSK modes for instant control response.

Choose Your Version:

Option 1: SuperX Nano (Dual-Band Diversity)

The ultimate solution for long-range explorers, cinematographers, and racers.

• Hardware: Powered by Dual LR1121 Chips and Two U.FL Antennas.

• Operation: Capable of Simultaneous transmission/reception on 900M and 2.4G (Gemini Xrossband).

• Best For: 5-inch+ drones, Long Range, and Critical Mission flights where signal loss is not an option.

Option 2: SuperX Mono (Band-Switching Agility)

The versatile choice for micro builds and weight-conscious pilots.

• Hardware: Powered by a Single LR1121 Chip and One Dual-Band Antenna.

• Operation: Allows you to switch between 900M and 2.4G bands depending on your needs (Note: Cannot run both simultaneously).

• Best For: Micro drones, Whoops, and 2-3″ builds requiring a lightweight footprint.

Key Features:

• Next-Gen Chipset: Semtech LR1121 + ESP32-C3 for class-leading performance.

• Gemini Ready: True diversity capabilities for rock-solid LQ (Link Quality).

• Telemetry: High-power 20dBm telemetry output.

• Protocol Support: CRSF, SBUS, DJI RS2 Pro, and MAVLink.

• Easy Binding: Button or Firmware-based binding (No passphrase by default).

Specifications Comparison:

What’s in the Box?

[SuperX Nano]:

• 1x SuperX Nano Receiver

• 2x Dual-Band T Antennas

• 1x SH1.0 Double-Ended Connector

• 2x Heat Shrink Tubing

• 1x User Manual

[SuperX Mono]:

• 1x SuperX Mono Receiver

• 1x Dual-Band T Antenna

• 1x SH1.0 Single-Ended Connector

• 2x Heat Shrink Tubing

• 1x User Manual

SuperX Nano Receiver: