Description
iFlight BLITZ F7 Pro Combo SPECIFICATIONS
Wheelbase: Bottom Plate
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: Frame
Tool Supplies: Cutting
Technical parameters: Value 2
Size: 35*35mm
Remote Control Peripherals/Devices: Remote Controller
Recommend Age: 12+y
RC Parts & Accs: Antennas
Quantity: 1 pcs
Origin: Mainland China
Model Number: BLITZ F7 Pro E80
Material: Metal
Four-wheel Drive Attributes: Assemblage
For Vehicle Type: Airplanes
Certification: CE
Brand Name: IFLIGHT
BLITZ F7 PRO FC Features：
- Improved circuit design. better components. and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
- 512MB BlackBox
- With LC filter
Specifications
- Mount pattern: 35*35mm/ 4mm PCB hole diameter
- Smartaudio / IRC Tramp VTX protocol supported
- Firmware target: IFLIGHT_BLITZ_F7_PRO
- Input Voltage: 14.8V-34V (4S-8S LIPO)
- Motor outputs: 4x (SH1.25 connector)
- Flash: 512MB (Blackbox flash)
- I2C serial: SDA / SLA pads
- Dimensions: 41*41.5mm
- Barometer: DPS310
- OSD Chip: AT7456E
- LED controller: Yes
- MCU: STM32 F722
- Weight: 17g (±2)
- Beeper pad: Yes
- Gyro: BMI270
- UARTS: 4
BLITZ E80 4-IN-1 ESC ：
- The MOSFET used by BLITZ E80 is PSMN1R0-40YLD. which can withstand a continuous current of 80A at 25°C. with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip. supporting up to 100V.
- The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ. ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz. combined with a three-in-one driver IC. achieves a faster running speed!
Features:
- Rational layout. countersunk holes on extended solder pads to ensure PCB layer connection
- G071 MCU. 48mHz maximum clock speed;
- TDK MLCC Low ESR ceramic capacitors;
- Top grade PSMN1R0-40YLD MOSFET;
- 8 layers double-sided PCB board
Specification:
- Product Name: BLITZ E80 4-IN-1 ESC
- Input Voltage: 2-8S
- Max. Continuous Current: 80A
- Max. Burst Current: 100A
- MCU: G071
- BEC: No
- Firmware: BLHeli32
- Current Sensor: Yes
- Telemetry: Supported
- Target: IFLIGHT_BLITZ_G2
- Mounting Dimensions: 35x35mm/Φ4mm
- Dimensions: 35x42mm
- Weight: 65g(±10)
- Protocal:Supports DShot DShot150/300/600/MultiShot/ OneShot etc
Package included:
- 1 x BLITZ F7 Pro Flight Controller
- 8 x BLITZ E80 Single ESC with CNC Alum Cover（optional）
- 8 x 50V 470UF capacitor（optional）
- 8 x Power cables & ESC signal wires（optional）
- 2 x BLITZ Pro PDB（optional）
- 4 x BLITZ E80 Single ESC with CNC Alum Cover（optional）
- 4 x 50V 470UF capacitor（optional）
- 4 x Power cables & ESC signal wires（optional）
- 1 x BLITZ Pro PDB
- 1 x Screws Pack
- 1 x USB Adapter Board
Reviews
There are no reviews yet.