Description

SPECIFICATIONS

Use: Vehicles & Remote Control Toys

Upgrade Parts/Accessories: Frame

Tool Supplies: Cutting

Technical parameters: Value 3

Size: 3inch

Remote Control Peripherals/Devices: Remote Controller

RC Parts & Accs: Propellers

Plastic Type: PC

Origin: Mainland China

Model Number: Four-axis Aircraft Paddle Protection Ring

Material: Plastic

Four-wheel Drive Attributes: Assemblage

For Vehicle Type: Airplanes

Brand Name: Readytosky

readytosky is a professional FPV RC Module accessories company . if you want to know more about trade for wholesale and bulk purchase. please contact us freely .

Feature:

 3-inch paddle protection ring The PC material is the same strength and toughness as the FPV propeller. 1SET 4 PCS            1set xOnly paddle Guard (4pcs) ( other items not included)        

readytosky is a professional FPV RC Module accessories company . if you want to know more about trade for wholesale and bulk purchase. please contact us freely .

   Name: X95 95mm FrameArm thickness: 2.0MMUpper board: 1.0MMWeight: about 38 grams (with protective ring)Paddle: up to 2 inchesCamera installation space: 19MM/21mm Support Camera：Foxeer and Caddx cameraFlight control installation: standard 20mm x 20mm3D print: redPropeller protection ring: transparent red / transparent blue / transparent gray (three: 1 * 4)Wheelbase 95MM2 inches   Flytower F3 Integrated OSD Mini Flight Control   Receiver configuration. when SBUS and DSM receiver input. please configure RX3 as the input interface.   The DSM receiver takes power from 3.3V.   The SBUS and PPM receivers take power from 5V.   Factory firmware: betaflight 3.1.0 OMNIBUS     First. equipped with MPU6000 F3 flight control acceleration faster response; integrated 5V 1A BEC. integrated OSD. (This version is 6DOF. no barometer and electronic compass)   1. This board provides all the features. weighs only 7.7g. fixed hole for the 20MM ( M2.5 hole );2. For four-axis models tailored. built-in LC filter. support BF firmware;3. Using STM32F3CCT6 single-chip 256K flash memory. MPU6000 sensor SPI interface connection. faster computing speed;4. Support 2-4S power input;5. Built-in 5V 1A output BEC;       Flytower F4 Integrated OSD Mini Flight Control     First. equipped with MPU6000 F4 flight control acceleration faster response; integrated 5V 1A BEC. integrated OSD. (This version is 6DOF. no barometer and electronic compass)   1. This board provides all the features. weighs only 8g. fixed hole for the 20MM ( M2.5 hole );2. For four-axis models tailored. built-in LC filter. support BF firmware;3. Support 2-4S power input;4. Built-in 5V 1A output BEC;             Fetures：   25A 4 in 1 ESC:    1. Input voltage: 2-4S LiPo/2-4S HV LiPo   2. BEC: OPTO (none)   3. Single ESC Constant working current: 25A (maximum current:30A 5 seconds)   4. Four-in-one ESC size: 31*33.5mm (including pad and protruding point maximum size)   5. Four-in-one ESC weight: 4.9g   6. Firmware: BLHELI_S   7. Support DSHOT600. DSHOT300. Dshot150. Oneshot125. Multishot. PWM   8. Processor: SILABS EFM8BB21F16G   9. Mos: AON7202   10. Driver: A new generation of three-in-one MOS driver    

Specifications:* Propeller diameter: 11cm* Stator diameter: 20cm* Stator thickness: 8mm* Number of stator holes: 1t (presumably 8)* Motor KV rating: LUUOU Load Current 7.4A* Lipo battery capacity: 1.54Ah* Max motor resistance: 0.165 Ohms @ 14V* Weight: approximately 3.55g* Outside diameter: 14.2cm* Body length: not specified

oooony Fude Ioooory Icooorv Im china Wde In china D1103 Wde IM China Wde Icoorv IM china oooory Fude icoo

     The FE200T series is transmitted as a 5.8G ISM band analog image transmission. It has stable output power. long transmission distance and strong power supply filtering. It can ensure that the image has no snowflake and no horizontal stripes under the maximum throttle. The picture adopts the flight control OSD (TXD) signal to control the transmission frequency (IRC Tramp). and only needs to connect any TXD (serial port transmission) of the flight control to the RXD (serial port reception) of the picture transmission. and also The function of manual button switching is retained. Support PIT mode tuning.  Features:1. The output power is stable and the transmission distance is long.2. Fast 3-speed power switching. independent two red indicators. indicating the current transmitting power of 25/100/200MW.3. The frequency point uses 4*3 LEDs to display 40 channel values.4. support OSD remote tuning (IRC Tramp). support PIT mode tuning. can only be opened in the OSD.5. small size. the antenna uses IPEX interface. reducing the footprint of the PCB board.6. small size: 16.5mm * 16.5mm. mounting hole M1.7. light weight: 1.7gPerformance:1. input voltage: DC 4.5-5.2V2. Input current: 200MW = 400 MA3. power switching: third gear 25MW. 100MW. 200MW4. signal channel: 405. frequency switching: manual button / OSD (IRC Tramp) (simultaneous support)6. antenna interface: IPEX7. the dimensions: 16.5MM * 16.5MMOverall introduction:  GND power supply negative+5V power supply positiveRXD flight control serial transmissionVIN camera video input

Frequency adjustment:First. manual adjustment Switch frequency points.Short press: switch channels. 4 blue LEDs and 3 green LEDs indicate channels.There are 40 frequency points. and the specific channel frequency refers to the frequency list.    Power switching:Long press (greater than 2 seconds) power adjustment. Press once to switch the power 25MW. 100MW. 200MW.The default shipment is 200MW.   OSD Assistant   1. In the PORTS of the flight control. you need to configure the TX port to be used for the OSD adjustment. and the interface needs the interface. as shown in the following figure in UART1.   Select IRC Tramp.The first step is to properly configure the receiver to ensure that the receiver channels are normal. In the example. the OSD is used for TX1 and the receiver is used for RX6.Step 2 Put the throttle to the middle position about 50% (THR MID). the direction lever to the far left (YAW LEFT). and the pitch lever to push forward (PITCH UP). Enter the OSD menuThe third step is to switch the VTX channel and transmit power.On the MAIN page. select the FEATURES item and go to the FEATURES page.Select the VTX TR option and go to the VTX page.Select CHANNEL to switch channels and select POWER to switch the transmit power.Select SET and select YES to make the settings take effect.       Precautions for use1. Pay attention to the input voltage within the specified range and the positive and negative poles are correct. so as not to damage the internal components;2. If the antenna is replaced. please select the standing wave and the antenna with good gain to obtain a longer transmission distance;3. Pay attention to static electricity during transportation and installation;   1set x X95 Full carbon Fiber Frame (assembled)1pcs x Mini F3/F4 Flytower( send as your choice)4pcs x D1103 10000KV Brushless Motor1pcs x 700TVL Mini Camera1pcs x FE200T Transmitter1pcs x Lollipop 5.8G 2.3dBi RHCP UFL antenna4pairs x 2030 Propeller